How to break the bead on a lawn mower tire? (Step by Step)

When you are planning to detach the tire from the lawnmower, you will have to break the bead on the lawnmower tire. But do you know how to break the bead on a lawnmower tire?

The tire of the lawnmower has a heavy impact on the performance and working of the lawnmower. Therefore, having a tire that is working properly is highly essential.

If you are planning to replace the tire, you will have to detach the previous tire that is already installed. So, before you finally detach the tire, you will have to break the bead of the tire.

Below we have compiled a comprehensive guide to help you with Breaking the bead of the tire of the lawnmower.

Why break the bead of the lawn mower tire? 

There can be a few reasons why you need to break the bead of lawn mower tires. Let’s talk about the reasons that can be valid in that situation.

If you are planning to remove the tire of the lawnmower, you will have to break the bead. Anytime you are planning to detach the tire, you will have to break the bead.

The same is the case if there is any leakage in the tire of the lawnmower or if you are planning to clean the tire properly.

How to break the bead on a lawn mower tire?

Now, if you are planning to bring the bead of the lawnmower tier, you will have to follow the simple steps that we have discussed below. Make sure you follow these simple and easy steps.

Break tire bead with pry bar

The easiest and most simple solution is to use a screwdriver that is extra-long, or you can also use a pry bar.

The steps you will have to follow are listed below. Check them right now.

  1. The first thing that you will have to do is to lay the tire of the lawn mower flat on the ground. It is better if it is a garage Floor or bump-free driveway.

  2. The next step is to stand on the double of the tire and not on the rim of the tire. If you accidentally stand on the rim, it can bend it, which can be a cause of the accident. And if the rim is bent, you will have to get it repaired separately.

  3. Now use the screwdriver to separate the rubber from the rim of the tire. Use the screwdriver on the edges of the tire and move slowly to detach the rubber from the rim.

  4. Now is the most important step. This is the step where you break the bead with the help of your weight. Once you break the seal of the wheel, you can eventually get the rubber separated from the rim.

  5. You will find tire beads on both sides of the tire. And for that, you will have to flip the tire to the other side.

Use hydraulic jack

The hydraulic jack also works incredibly well for Breaking the bead of the lawnmower. If you are planning to break the bead on the lawnmower tire, we can help you out if you have a hydraulic Jack.

  • The first thing that you have to do is to understand how to use a hydraulic Jack. Once you get the hang of it, you can finally start using the hydraulic jack on the lawnmower tire to break the bead.
  • The next step is to place your tire from the learn more on a wooden board. It has to be over the hydraulic jack. Also, there has to be enough space available for the hydraulic jack so that it does not bend or Dent the rim of the tire.
  • For Breaking the bead, you will require a solid-edged surface. Also so when you are using the hydraulic jack, you will have to raise the tire properly, enabling the drill to have maximum power.
  • Once the hydraulic jack pushes that either of the lawnmower, you will have to press the rubber of the tire against the pressure. It is still important that you do not touch the rim but only the rubber of the tire.
  • You can try this same process at least five times to break the bead on both sides of the lawnmower. Later you can get there out of the rubber.

Some other tools for breaking the bead of the tire

If you have tried the above two methods, you can also use the wooden board for Breaking the bead. Or there is another bead breaker tool available that can help you with the easy breaking of the bead.

However, besides all of that, you will have to take some safety precautions as well.

Make sure you are wearing gloves to protect your hand when you are working with the lawnmower tire.

Also, make sure that you do not put a lot of force into the lawnmower tire. Because if you are putting a lot of pressure and force, it can also bend and Dent the rim of the tire.

Conclusion

Now that you know two of the most basic and easiest methods of how to break the bead on a lawnmower tire, you can finally perform the task. However, one has to be careful about wearing gloves to protect the hands.

Also, you will have to be careful about putting pressure on the bead of the tire. 

A few things that you must keep in mind that there has to be a reason for breaking the bid of the lawnmower. You can do it if the lawnmower tire is not working properly and you are planning to detach it.

Also, if you are planning to clean it properly, you can use this method to break the bead. Also, keep in mind this process is not for the push on lawn mower options. This is the method that can be used only for riding lawnmowers.

If you liked the content, please share to one who needs!

You cannot copy content of this page