How to Cut Tall Grass with a Riding Mower?
|

How to Cut Tall Grass with a Riding Mower? (Helpful Tips)

Overgrown plants are especially difficult to handle. In this case, the manual handle method will no longer work.

This is why you need special tools like a lawnmower to make mowing easier. But wait, this is not just any kind of lawnmower.

We especially recommend using a riding lawnmower.

One thing that must be considered when learning how to use a lawnmower to cut tall grass, is the specific blade used in the lawn mower.

When using a lawnmower to cut tall or overgrown grass, measures must be taken to protect the lawnmower from damage and keep the grass healthy, while still completing the work as quickly and efficiently as possible.

When cutting the tall grass with a portable lawnmower, follow the steps below to get the best results:

  • Mow on dry days in spring, summer, or early fall.
  • Clear the area of ​​rocks, branches, and man-made debris.
  • Use a string trimmer to cut the grass to a height of 6 to 8 inches.
  • Place the blade of the lawnmower at the highest height.
  • Adjust the throttle of the lawnmower to slow. Don’t know how then check this guide to get some idea.
  • Trim the circuit and, cut half of the circumference of the largest blade.
  • Periodically reverse the direction of the mowing circuit.
  • Turn off the lawn mower every 30–45 minutes.
  • Check the blades for excessive accumulation of grass and remove it if necessary.
  • Let the lawn mower cool down.

By performing the following methods, you will clear tall grass and leave a healthy, easy-to-manage yard without damaging or stressing equipment.

Steps to Follow:

Now, let us figure out how to cut tall grass with a lawnmower step by step.

Regardless of the type of lawnmower you use, these are the common steps you need to perform.

Step 1. Clean up the Area:

Clear the area you need to trim. For this, you need to take away all branches, stones, branches and any obstacles that may hinder the lawn mower.

Step 2. Prepare and set up the lawnmower:

In this step, you can switch the settings of the lawnmower to set the required lawnmower height.

However, you need to click on the broken piece of the lawnmower before placing it in neutral.

After that, you can now release the clutch, lower the mower, and then adjust the throttle to “Slow”.

It is advised not to put it to the lowest height to prevent harm to the blade, just in case there is a hard object on the ground.

Step 3. Start Mowing:

Now you can start mowing. Keep the direction in a straight line.

Step 4. If there is resistance, press the accelerator:

The reason you need to start moving slowly is that if you encounter any resistance while mowing, you can press the accelerator. You don’t want to put too much pressure on the machine, so you have to do it easily.

Step 5. Stop the lawnmower and empty the grass bag:

If you trim in a long straight line, you must stop at the end of the line and empty the straw bag.

At the same time, if you think this line is shorter, you can shrink it before emptying the bag.

Step 6. Return to the first starting point:

Go back to the first starting point, and then trim the same path again. This time, you must set the position of the lawnmower blade to be lower than the first attempt.

This time turning the lawnmower down a bit is a more effective and safer method, because this time there is almost no resistance.

Step 7. Repeat steps 3 to 6:

Now move to the next line and perform the same steps as in 3 to 6.

Other Tips to Consider:

Trimming the overgrown grass is not an easy task. By practicing the safe operation of the lawnmower and paying attention to details, you will get the best results.

Here are some things to consider:

Watch out for thick weeds and trees:

Don’t try to trim saplings or shrubs that are thicker than your thumb. You may damage the lawn mower blade. It is best to cut them off before mowing.

Pay attention to stumps:

Even small tree stumps or stones can stop the blades of the mower from touching, causing the mower’s engine to shut down.

Note that the degree of danger seems to be low, but it is actually in danger due to blade height.

Protect wild animals and plants:

Tall grasses usually hide many animals. Frogs, snakes and mice may live in the tall grass. Slowly mow the grass so that the animals have time to escape. This will ensure that you will not harm or kill any animals.

Lift the grass discharge chute:

A faster mowing strategy is to raise the plastic cover of the grass discharge chute by 1-2 inches.

This will allow more grass to escape and reduce clumping of wet grass inside the blade rack.

However, please be careful, as this may throw potentially dangerous debris off the slide.

Conclusion

Tall lawns will be more difficult to maintain and will not look so attractive.

This is why learning how to mowing with a lawnmower will help you immensely.

So don’t hesitate to follow this guide to learn how to use a lawnmower to mow tall turf grass on any lawn.

After considering our suggestions, you will not regret it. The lawn will look better than ever!

If you liked the content, please share to one who needs!