How to Remove a Stuck Lawn Mower Wheel? (Quick Guide)

There is nothing more frustrating than trying to mow the lawn when the lawnmower doesn’t move at all. If this happens, this means you have a stuck lawn mower wheel. Although this problem may be frustrating. You can repair the lawnmower at any time, and then continue to mow the lawn within a few minutes.

You know that the wheels of the lawnmower may be stuck for various reasons. Regular use, rusty axles, and punctured wheels can cause dust to accumulate in the axles. So, what are you thinking? Do you call the mechanic or remove it away by yourself?

A stuck mower wheel can be removed without calling a mechanic. You can do it yourself at home. So how can you do this at home? Do not worry.

We are here to find you all possible solutions on how to remove the stuck lawn mower wheel. Let’s dig it.

The process of removing the stuck lawn mower wheel:

For any type of repair, installation, or un-installation work, we first need to know what tools we need. We should always make sure first that all tools are close to our hands.

Now, let’s take a look at the tools needed to remove the stuck lawn mower wheel.

Tools Needed:

  • A Wooden block
  • Hydraulic jacks
  • Hammer
  • Socket wrench
  • Needle nose pliers
  • Penetrating Oil
  • Hand gloves
  • Goggles

Steps to Follow:

Step 1: Place the lawnmower on a flat surface. It will make your work a breeze.

Step 2: Now, put the lawnmower in parking mode. Don’t forget otherwise, the lawnmower will move during maintenance. For this, you can also use two bricks in the rear wheel.

Step 3: Now take the pliers and remove the cover from the center of the wheel. Take out the washer too.

Step 4: If you find any bolt in the center, use a socket wrench to remove it.

Store the bolts, caps, and washers carefully in a safe place for re-installation.

Step 5: Now this time bring the hydraulic jack close to the stuck wheel.

Place a wooden block under the mower frame of the stuck mower. This will lay the foundation for your work.

Use the jack handle to turn the hydraulic valve of the jack clockwise to tighten it.

Step 6: After correctly placing the jack under the faulty wheel, gently lift the jack upwards.

Continue to do this until the jack is correctly installed on the axle.

Step 7: When the wheel rises to a point above the ground, stop rotating the handle of the jack.

Now it is time to remove the stuck wheel.

Step 8: Now it’s time to spray some penetrating oil between the rim and the axle. Make sure that the oil is evenly distributed on the front and back of the rim. This will help remove rust on the wheels.

Pull the rim back and forth. When the wheel does not come out, apply some oil. If there is rust on the rim, please wait for 15-20 minutes.

Step 9: Now, take a wooden block and a hammer. Locate the block somewhere between the center and the edge of the wheel.

Hold the wood tightly with one hand, and continue to hit the wood with the hammer by another hand. After playing for a while, try to take out the wheels.

If it does not come out, repeat the process until the wheels come out.

Step 10: When the rust on the rim is completely removed, the wheel will come out. However, please be careful not to damage the axle.

Done! Now you can re-install the wheels and use the lawnmower as before.

Alternative process: Heat and Wax Method

In addition to the above methods, you can also use wax and propane torches to remove stuck wheels. Let’s take a closer look at the process:

Step 1: Use a propane torch to heat the rim and axle, and spread some wax between the rim and axle.

Step 2: Dissipate a small amount of heat to avoid damage to the axle.

Step 3: Wait until the wax melts. When the axle cools, hold the wheel and pull the wheel back and forth, the wheel will come out.

Precautions:

  • Before starting work, please collect the user manual from the company website and read it carefully. This will help you perform the task easily.
  • For safety, please wear hand gloves and goggles.
  • Be careful when handling socket wrenches, pliers and hammers.
  • When removing the jack, keep your child away from the lawnmower.

Warnings:

In any case, a lot of misfortune must be avoided. When entering the wheel dis-assembly project, please make sure to observe the following points:

  • Be sure to turn off the engine to avoid accidental sparks. Following this recommendation can eliminate the chance of explosion and serious injury.
  • Clean the visible holes and ridges on the wheel. This will remove any debris and branches that may cause physical harm to people around the mower.
  • Be careful when parts are stuck or jammed and don’t apply excessive pressure; this can easily lead to bone dislocation and other injuries.

Conclusion

Finally, it can be said that if the above process is followed, it is not difficult to remove the stuck lawnmower wheel.

We have discussed the easiest method to remove a stuck wheel of a lawnmower.

Try to follow the first process. It is more convenient for you to use than the alternative process.

If you try the first procedure, you will remove the stuck wheel at home. It will reduce your costs and improve your skills.

Hope this article helps you and provides you with all the necessary information on how to remove the stuck wheel of a lawnmower.

If you liked the content, please share to one who needs!

You cannot copy content of this page