How to Bypass Safety Switch on John Deere Lawn Mower? (Find out)

The John Deere lawn mower consists of three safety switches. They protect against many situations. One protects breaking, the second one handles cutting blades and other accessories. The third one safeguards against operation without worker. This third switch is the seat safety switch. It prevents the engine from starting if the operator is not seated. If the rider puts in the gear while standing, the engine shuts down.

The purpose of a safety switch is to save you from any injury. If you feel disturbed, you can disconnect it. We are here with the process. Here we will discuss how to bypass safety switch on John Deere lawn mower.

How to Bypass Seat Safety Switch on John Deere Lawn Mower


Many people get injured in the mower accidents. The main reasons are loss of control or being in contact with the blades. To prevent these situations, manufacturers have incorporated John Deere riding mower safety switches. This push button cuts off power to the blades when the seat becomes empty. You can disable it when needed.

Here are the steps to follow:

  1. Turn off the Engine

    Take your lawn mower to a flat terrain or garage for convenience. Turn on the parking mode. Shut off the engine and remove the key to the ignition.

  2. Lift the Mower Seat

    To remove the mower seat, you need to disconnect the bolt that slides down the seat. If you recently used the mower, then allow it to cool down.

  3. Locate the Safety Switch

    The safety switch is present on the bottom of the worker’s seat. It is of a plastic harness. Two wires from the engine connect to this switch.

  4. Pull Out the Safety Switch Wires

    Grab the plastic harness and pull out the wires. If you cannot pull by hand, you can use a wire cutter. Hold the wires in your hand so that they do not drop on the mower.

  5. Strip off the Wire Ends

    Strip off the wire ends with the help of wire strippers. Then take the ends of the two wires and twist them together.

  6. Cover the Twisted Wires with a Wire Nut

    Now cover the intertwined wires with a wire nut. Twist it to secure well. Wrap the wires and nut using electrical tape. This will help to keep the nut in place.

  7. Lower the Lawn Mower Seat

    Lower the seat on the mover to continue operating it.
    Note: Following these steps will disconnect the safety switch. Disconnecting it will put you at risk, so you need to consider this before you go for it.

How to Bypass Reverse Safety Switch on John Deere Lawn Mower

The reverse safety switch is underneath the hood of the lawn mower. It prevents the rider from reversing when the cutting blades are moving. To reverse, the operator needs to disable the deck. This safety switch protects against personal or property harm. You can injure yourself when objects behind are not in sight. Here are the steps for John Deere reverse safety switch bypass.

Step 1: Shut off the Mower

Turn off the mower and remove the ignition key. Let it cool for some time.

Step 2: Lift the Mower Hood

Lift the hood of your lawn mower and locate the battery.

Step 3: Disconnect the Battery

Disconnect the battery using ratchet and socket. First, remove the negative cable then the positive cable from the terminal.

Step 4: Locate the Safety Switch

Then locate the safety switch to the negative place of the battery. Take the plastic harness with wires.

Step 5: Disconnect the Wires

Hold the plastic harness and wires. Pull out the wires. Use pliers if they are hard to pull by hand.

Step 6: Reconnect the Wires

Now reconnect each wire to the right post. Start with the positive cable.

Step 7: Lower the Mower Hood

After lowering the mower hood, sit on the seat, enter the ignition key, let the blades run. Now reverse the mower.

Safety Measures

  • Use gloves when you are working with the wires
  • When disconnecting and reconnecting the wires, use the ratchet and pliers with care. Negligence can cause injury

Conclusion

Learning the steps, you know how to bypass the safety switch on John Deere lawn mower. You can do it yourself at home. Keep in mind that bypassing it can put your safety at risk. When you disconnect the safety switches, the manufacturer’s warranty may become invalid. So, you need to be careful with the process. Thank you for checking this article.

If you liked the content, please share to one who needs!

You cannot copy content of this page